Action P Bass

Sur le site Fender :

Setting pickups too high can cause a number of unusual occurrences. Depress strings at last fret. Using a 6" (150 mm) ruler, measure the distance from the bottom of the first and fourth strings to top of the pole piece. A good rule of thumb is that the distance should be greatest at the fourth-string neck pickup position and closest at the first-string bridge pickup position. Follow the measurement guidelines from the chart below as starting points. The distance will vary according to the amount of magnetic pull from the pickup.
Note: Larger string gauges need wider vibrational allowances. If you have a five-string bass or are using heavier-gauge strings, your measurements must be increased accordingly.
_________________________Bass Side_____________Treble Side
Vintage style_____________8/64" (3.6 mm) ________6/64" (2.4 mm)
Noiseless™ Series_________8/64" (3.6 mm) ________6/64" (2.4 mm)
Standard "J" or "P" ________7/64" (2.8 mm) ________5/64" (2 mm)
Special Design Humbuckers _7/64" (2.8 mm) ________5/64" (2 mm)

Ah oui, et si par hasard tu n'as pas la bonne clé (ça arrive, je sais plus trop sur quelle basse et sur quelles vis mais parfois c'est pas du système métrique, c'est le système anglais), détend ta corde et tourne la vis à la main.

On parle des pontets, prends moi pour un con.

Edit: Au temps pour moi, j'avais pas vu la 2e page du topic.